Within the Input section, select the CODE 25/49/61 and adjust the settings as shown below:. In Output section, adjust the settings as shown below:. Once this is done, the Code is now ready to map to your software. The screen will also read MACHUI for a second. To enable the faders, buttons and knobs as Mackie, just press each MODE button until it's lit green. Mackie will adapt the parameters to the Mackie protocol for quick mapping with your DAW. MIDI will assign the parameters to generic MIDI messages which are also user assignable. 
Each parameter bank will have a MODE button to change their current mode. The faders, buttons, and knobs on the code have two different modes: MIDI, and Mackie (the buttons can also be set to HID).
You want the display to show MACKIE, and then after about a second, the keyboard will return to the main display. On your key bank, select the C#, with the label CURVE/MACKIE/HUI. Here is the process to activate the Mackie mode on the code: Any Mackie keyboard should be able to quickly to connect with any DAW that supports Mackie. 
in your software by making them both speak the same language. on a Mackie keyboard to the faders, knobs, etc. In order to connect to FL Studio, the code will use a common control protocol called "Mackie." This is essentially a way to map all of the faders, knobs, etc.
After connecting the controller to your computer, Windows will install the driver necessary for the M-Audio Code series to communicate with your computer.This will provide the most power necessary to the controller for optimum performance.
We recommend going into the back of your computer, as this is closest to the power supply.
Begin by connecting the M-Audio Code series to a free USB port on your computer. The M-Audio Code series is a class-compliant MIDI device. A class-compliant device is one that doesn't require extra drivers to connect your Windows or Macintosh computer. Class compliant devices use drivers which are built into the host (i.e. This guide walks through how to setup with Reason M-Audio presents its Code Series keyboard controllers, a family of three full-featured models, combining all of the production power and performance you need to get the most from your music software and MIDI gear.
0 kommentar(er)
